Fire alarm activated but no fire found at Albany St, Albany NY
A fire alarm was activated near Albany Street. The fire department responded but found no fire. Electricians remained on site to inspect the cause of the alarm. Fire units returned to service after confirming no emergency.
Audio|Source: Albany City and Colonie, Police, Fire and EMS
02:16
Transcript:
00:00
Signal 20[1], 437.
00:07
The signal 20 for the fire alarm, near Albany St, holding midway engine, 437 only at 1339.
00:21
652, you're clear to answer.
00:25
Scott.
00:27
1340.
00:30
Midcom, squad 10 or no.
00:32
Squad 10, you're under it at 1340. You're clear to enter now.
00:39
Copy.
00:40
Copy. You can't do that here.
00:48
652 arriving at 1340.
00:51
6.5.2, midcom, you can cancel the fire department. We're also up.
01:00
Squad 10 return.
01:02
Squad 10, copy.
01:10
You take 10 mass in place for the neighbor trouble?
01:14
Which is.
01:18
So you can disregard. Can you store over near North Swan Street, second floor for the neighbor trouble?
01:25
13.2.
01:27
Okay.
01:32
Please,
01:33
Judge Tren, truck, three, arrive, any penalty stops. Command, five-story, resident, Chold, dormitory, nothing, strong, companies, and investigating.
01:42
Undertaudgeon, Time to see you, 1342.
01:45
Daniel on the ride.
01:48
Andrew 1, 13.42.
01:52
1423.
01:54
Spotters on midway command.
02:04
To confirm the alarms at a service at this time,
02:07
electricians are going to stay on site.
02:09
You're going to return all midway.
02:11
All midway and service at 1343.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Signal 20: Request for adjusted fire response or holding units based on incident status or severity.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Albany St, Albany, NY 12205
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect