Fire alarm at multifamily building triggered by dirty smoke detector, Amherst MA


Firefighters responded to a fire alarm at a multifamily residence near Main St. The alarm was caused by a dirty smoke detector. There was no fire found.
Audio|Source: Amherst Fire
01:24
Transcript:
00:00
On near Main St, 2 and a half for a residential, multifamily.
00:03
You'll be command investigating, nothing showing.
00:05
Engine one, I have you on scene, nothing showing, investigating.
00:07
XY Lab Main Street command at 0333.
00:10
Go ahead, A3.
00:11
Clear Citiage, C2nda.
00:13
A3, clear, Citiage, returning out 0.34.
00:15
79A4. Go ahead, A4.
00:18
A4 is clear CDH training service.
00:20
A4 clear CDH turning service at 0.037.307.
00:23
7.9 for Main Street Command.
00:24
Go ahead, Main Street Command.
00:25
Cause the alarm with a dirty detector, engine reset, engine one's service returning.
00:29
Command advising cause the alarm with the dirty detector, systems have been reset.
00:33
Command is going to be terminated, engine one returning a service at 0.038.
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near Main St, Amherst, MA 01002
Correct
Incorrect