Fire alarm sounding at apartment complex with no smoke, Ashland WI
Fire & ArsonA commercial fire alarm sounded at the Daniel Kimball Villa Apartments. Residents heard the alarms but did not see or smell smoke. Fire officials suspect the alarm was triggered by an overheated dryer in the building.
Audio|Source: Ashland Bayfield Counties Public Safety
02:32
Transcript:
00:00
Dispatch to Ashland Fire and EMS response requested near Kimball St for an alarm company reports a commercial fire alarm smoke detector in the hallway.
00:29
Dispatch to Ashland Fire EMS, response requested near Kimball St Daniel Kimball Villa Apartments for an alarm company reporting a commercial fire alarm.
00:42
It came in as a smoke detection, time of page 2218.
00:53
Agent 2, Tower 11, Med 7.
01:02
This statute is a command.
01:04
I've got a call from one of the residents.
01:06
They said they can hear the alarms, but they don't see or smell any smoke.
01:14
I can repeat that message.
01:22
At the apartment complex, they can hear the alarms going off, but they do not see or smell any smoke.
01:38
Answer 2, bud.
01:40
Agent 2, 311, Med 7-R-R-out.
01:43
Kimball Villa.
01:46
10-4[1]-H0, 2220.
01:53
Seven, go ahead.
01:56
Mid-7, same traffic.
02:03
A large residential structure, ovens showing, C2Lath command.
02:14
The facility from an overheated dryer.
02:22
and Med7 on scene.
02:27
Thumb for Tower 11, Med7 on scene 2221.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
10-4: Acknowledgement/Affirmative
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Kimball St, Ashland, WI 54806
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
