Fire alarm triggers evacuation at manufacturing facility, Buncombe County NC
Fire & ArsonA fire alarm was activated at a large manufacturing facility near Vista Boulevard in Arden, NC. An evacuation was underway. Firefighters found no signs of fire but continue to investigate.
Audio|Source: Buncombe County Fire and EMS
01:45
Transcript:
00:00
Section 21 District 2, FireLum activation[2] at the Boulevard.
00:02
Station 21street to Firearm Incubation near Vista Boulevard Station 21 District to Fireland activation.
00:10
near Vista Boulevard Cotovina Chonsor Control.
00:14
It's going to be welcome fired this place, 0648.
00:17
Communications to Brush 10.
00:18
Four things ten-four.
00:20
Okay, four things. Engine 21-2, you're fine.
00:22
One-two. Brush ten, roadway clear, back in service.
00:24
Copy brush ten. Two, fifty-one.
00:25
Ladder 20 route.
00:26
Ladder 21. Ladder 21.
00:27
I was from Eugent 212.
00:28
212. 21 2. Go ahead.
00:30
On scene, large manufacturing facility.
00:34
Evacuation in progress[1].
00:35
That's not the fire. Open out for that suggestion.
00:36
Put-on-2 coffee, large manufacturing facility, vacuum process,
00:40
no signs of fire, you all for investigating.
00:42
Zero-two fifty-three.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Evacuation in progress: Evacuation of building/facility
[2]
FireLum activation: Fire alarm activation
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near Vista Blvd, Arden, NC 28704
Correct
Incorrect
