Fire alarm triggered by water surge at Dan Rd, Canton MA
Fire & ArsonFire alarm was activated near Dan Rd, likely caused by a water surge. After checking, no fire was found and the system was reset.
Audio|Source: Norfolk County Fire Control
01:20
Transcript:
00:00
Ladder 1, final alarm[1], we're off 10 Dan Road, puts in Channel 5. Laddow, you're on, seeing, you're switching to 5. Man, from Car 5. Command, the answer. Systems reset, be normal. Received. And fire alarm from, General Command, command.
00:28
Following the answering downward command. This is an alarm most likely due to a water surge in the area. We've been able to reset the alarm. We're going to return engine six and ladder one. Command will be terminated and we'll go back to campaign. We'll be holding engine four and car five. Shoot command, you're holding engine four and car five, returning engine six in the ladder.
00:56
Alarm activation possibly due to a water surge, system has reset, releasing panel 5, 1902. One final, and we're back on the main channel, Claire returning. Water one, you have it. You're back on the main year returning. 1902.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
final alarm: Indicates completion of alarm response
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near Dan Rd, Canton, MA 02021
Correct
Incorrect
