Residential fire alarm activates near Eagle Ridge Rd, Chanhassen MN
Fire & ArsonA residential fire alarm was activated near Eagle Ridge Road in Chanhassen. Fire crews responded and found no visible signs of fire from outside the building after investigation. The alarm was due to a basement heat issue and was resolved by changing batteries.
Audio|Source: Carver County Fire
01:7
Transcript:
00:00
Chanhassen duty crew needed for a residential fire alarm.
00:04
Near Eagle Ridge Road.
00:07
Near Eagle Ridge Road covering Zone 9-9 Basement Heat. Time of page 935.
00:18
Just patched June 23, I'll be in service.
00:21
Chief 3 in service, 935.
00:29
Stretch 2nd, 2nd, 2nd, 2nd 3 confirm the arriving, ready to finish, or ready to report when you are.
00:35
2nd, 2nd, go ahead.
00:38
Driving at a medium-sized, two-story, single-family, nothing showing from the exterior on-site Alpha, Bravo, and Delta.
00:46
Beyond investigating, you can show, Chief 3, and Command.
00:53
Driving, nothing showing from the exterior, Alpha, Bravo, Delta at 9.39.
00:58
Just that's chain command.
01:02
Chan command.
01:04
Evans for changing batteries, no problem is on. You can clear out of the unit.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Eagle Ridge Rd, Chanhassen, MN 55317
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
