Fire alarm caused by faulty smoke detector in commercial building, Charlotte NC
Fire & ArsonFire units responded to a commercial building at 801 E 4th St in Charlotte due to a fire alarm activation. Upon arrival, no fire was found. The cause was identified as a faulty smoke detector on the third floor. The situation was resolved after resetting the alarm system.
Audio|Source: Charlotte and Mecklenburg County Fire
02:4
Transcript:
00:00
5-story commercial nothing showing 12 by command.
00:05
I'll copy the Vig12, command.
00:11
Entry 12, 4442 to command.
00:14
Alarm panel showing third floor, enter fire door.
00:28
Battalion 1, Engine 1, and Ladder 1, F[1]ire Alarm, 801 E 4th St.
00:34
Battalion 1, Engine 1, and Ladder 1, F[1]ire alarm, 801 E 4th St.
00:42
121, Border 1st, 7th Street.
00:45
All right for a reset, everything is clear.
00:49
Mail alarm patrol.
00:53
Problem coverage control time, 720.
00:56
Yeah.
01:01
Okay.
01:03
9-1 don't see if you have a lot in shell.
01:05
Okay,
01:08
one's okay.
01:15
Battalion 1, F[1]ire alarm, 801 E 4th St, on F, Foxtrot.
01:20
Battalion 1, F[1]ire Alarm, 801 E 4th St, on F,
01:25
F[1]ox Trot.
01:30
We're in a faulty smoke tech on a third floor in the same issue yesterday.
01:37
I see it, I'll do the driver, but I take it out.
01:42
Copy. The latter one, command.
01:49
Come here.
01:52
Command, go ahead.
01:54
Everything is key for more recommending control.
01:58
Copy. Command along control.
02:00
The whole ladder one.
02:02
Do you recommend control time, 07-24.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
F: Fatality (used with 10-50 to indicate possible fatality)
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near E 4th St, Charlotte, NC 28202
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
