Fire alarm triggers response at building on south cedar st, Danville OH
Fire & ArsonFire department responded to a fire alarm with visible strobes at a building near South Cedar Street. There was no visible fire or evacuation, and crews were investigating the cause, possibly a detector issue.
Audio|Source: Stark County Fire
02:6
Transcript:
00:00
Eisenberg, 249, in service on the air. 49 in service on the air, 809. Asselberg, Chief, wanted dispatch. Go ahead. Can you initiate? A run number for our public service, 113, South Cedar Street.
00:29
Copy. Any tools. Three sides do have visible strobes. Buildings not evacuated will be out investigating. Nothing showing from three sides visible strobes about investigating. This has permission prior.
00:56
The pass from Jackson, Inger 5. Engine 5, go ahead. Engine 5 has Hillsendale's Command[1]. Copy Engine 5 has Hillsendale's Command.
01:13
Engine 4, command. Go ahead. Four on scene, engine 5 is taking the FTC or staging intact. What do you need? Just stay intact for now. Looks like a quality detector. We're attacking 3rd 4 real quick.
01:42
Okay. We'll be staged on the south side main doors. Command[1] engine four, you can in service.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Command: Incident command established
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near S Cedar St, Danville, OH 43014
Correct
Incorrect
