Fire alarm triggered by workers causes water damage, Elizabeth NJ
Fire & ArsonA fire alarm was activated near Second Street in Elizabeth, New Jersey. Workers accidentally triggered the alarm and caused some water damage. There was no fire, and the alarm had already been reset before firefighters arrived.
Audio|Source: Elizabeth Fire Department
01:59
Transcript:
00:00
Transmitting a signal 408 near Second St, crosses our Elizabeth Avenue and Marshall Street.
00:08
It's going to be for an alarm sounding.
00:10
Engine 5, ladder 2,
00:12
you'll be responding.
00:13
Operating on fire ground 1, timeout is 2318, dispatcher 2524.
00:23
I don't want to respond.
00:29
I see.
00:31
I just 5. You're pretty fine.
00:47
Agent 5 is on the scene, second, or sorry,
00:51
near Second Street.
00:52
We'll have command of this again.
00:57
Received engine 5. You're on scene, you have command.
01:01
23, 22.
01:08
We're met by a building representative.
01:10
The alarm was reset prior to arrival.
01:18
The alarm is reset prior to your arrival. 23, 22.
01:28
This hatch from Second Street, command.
01:34
Answering command.
01:37
We have workers working and set off the alarm.
01:40
Also, some water damage.
01:42
You can reduce this to a signal 7 holding in your pot.
01:48
Receive business calls by workers reducing it to a signal 407.
01:54
Ladder 2, you can pick up.
01:58
How are you available?
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Second St, Elizabeth, NJ 07206
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
