Fire alarm activates at building with no fire found, High Point NC
Fire & ArsonFirefighters responded to a medical call near Westwood Avenue. A fire alarm was sounding in the building but there was no fire detected. Attempts to contact the building's keyholder were unsuccessful. Firefighters entered the building and found the alarm was silent.
Audio|Source: High Point Fire Department Dispatch
00:56
Transcript:
00:00
Attention. Engine 2.
00:01
Respond to near Westwood Avenue.
00:03
Medical call.
00:04
Cross Street of Lock Street and Council Street.
00:06
TACB 2. Attention.
00:08
Engine 2. Respond to near Westwood Avenue.
00:10
Medical call.
00:11
Cross Street of Lock Street and Council Street.
00:13
TACB2.
00:14
Go ahead.
00:15
Tim, we're just as if you made contact with the keyholder as well.
00:17
I've tried them five plus times at this time.
00:21
It keeps going voicemail.
00:22
10-4[1]. We made injury into the building.
00:24
Same alarm as going off the floor.
00:26
It's actually silent.
00:27
I'm about to tag the building if I can't get him to come down here.
00:30
47, if you would, just drive down here to me.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
10-4: Acknowledgement
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near W Westwood Ave, High Point, NC 27262
Correct
Incorrect
