Brush fire near Millers Road in Jasper County, Jasper TX
Fire crews responded to a brush fire near Millers Road in Jasper County, Texas. Heavy smoke and limited access made it difficult to reach the fire. A brush truck was required to contain the fire. There was also mention of a secondary entry point to the fire area. Obstacles such as trains hindered access to the fire location.
Audio|Source: Jasper Fire
03:24
Transcript:
00:00
Tanker 1 this better.
00:06
Tanker 1 being route 2 manned unit.
00:14
104.
00:15
180 tanker 1.
00:19
Go ahead.
00:21
What all units do we have in route?
00:26
Engine 2 and tank of 1.
00:29
We need to be all seen shortly.
00:38
We've got heavy smoke, heavy smoke.
00:44
Yep.
00:50
Jack for fire, are you still needing Lake Rayburn to respond?
00:59
Agent 2 on seat.
01:01
10 4.
01:09
Jack the fire, are you still needing Lake Same Rayburn to respond?
01:14
Uh, negative.
01:18
104. 7.4.
01:19
Engine 2, Tiger Waw?
01:24
Go ahead.
01:28
Hey, we're not going to be able to get in here to it.
01:30
We're going to need a brush truck to come out here.
01:32
We'll have to run a line down to it to get it out.
01:38
Central.
01:44
Patient 1 is clear with the brush truck.
01:53
Any two, second one.
01:54
It's resident saying there's a secondary entry.
01:57
We're going to see if we can locate this.
02:00
10-4[1].
02:03
Are y'all on 248?
02:07
Okay, 1047.
02:11
1047. If you come back right here by Millers, I believe you can get it from here.
02:23
We're on the road but actually getting down through the fire is the problem.
02:27
There's too many trains can't make the turn to get in.
02:30
Kempore, copy this.
02:34
I'm gonna stay here at Millers until y'all give me further.
02:39
Gibble.
02:46
Second one, yes you can come here to the resident and stay down on the road.
02:53
We can get in on this second interest.
03:00
So is that going to be on 247 or 248?
03:06
247 come down to where it makes a lift and you'll see it's on the lift.
03:17
You can show brush one, submarine on board.
03:24
Stand forth.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
10-4: Acknowledgment / Message received
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
