Fire alarm triggered by concrete cutting dust in Linden, Linden NJ
Heads up:
This is auto-generated from real-time dispatch calls. Information may be inaccurate. Listen to the original audio and verify critical information using official agency releases.
Fire & ArsonAccording to the dispatch call, a fire alarm in Linden was triggered by dust from concrete cutting during construction. No danger was found and the alarm was placed on test for one hour.
Audio|Heard on: Union NJ Fire Dispatch Group Calls
Listen to dispatch call
01:2
Transcript:
00:00
For four St.
00:01
Mark,
00:03
that reports that it's construction.
00:05
We've been canceled, ladder one, and engine two, and just have engine one respond to take a report.
00:13
This match, it's canceling the ladder and edge 2, Engine 1, which is responding to a report.
00:22
This match,
00:23
engine 1 is arriving on location for St.
00:24
Mark Street.
00:26
We have a two-story, looks like mixed-use occupancy, none shown from the exterior.
00:30
Engine 1 establishing Command investigating.
00:35
Receive, Region 1 on location, Establishing Command Investigating 1725.
00:40
Dispatch from St.
00:41
Mark's command.
00:44
Command, your message.
00:46
The alarm here was set off due to the occupant using a rotary saw to cut concrete.
00:52
The dust activated the alarm.
00:54
The alarm is going to be placed in tests for one hour until the work is complete.
00:58
There's no hazard here.
01:00
Engine 1 is going to be turning and command returning available.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
St Marks St, Linden, NJ 07036
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
Note:
Auto-generated from live dispatch audio, which may contain errors. Dispatch calls are not confirmed incidents. Always verify with official sources.
