Fire alarm activated with no hazardous conditions found, Milford NH
Fire & ArsonA fire alarm was triggered in a first-floor unit near Nashua St, Milford, NH. The fire department responded and found no dangerous conditions. The system was reset and the scene was secured with one engine remaining on site.
Audio|Source: Nashua Fire Rescue Ch 1-8
01:18
Transcript:
00:00
First floor unit near Nashua St.
00:02
First floor.
00:03
You're going to investigate.
00:04
On the street command, all file.
00:05
File, I'm answering command.
00:07
Activated detector[1],
00:08
no conditions, please call under control.
00:11
You hold engine two.
00:12
Activated detector[1] with no conditions, placing the caller control holding engine two only.
00:16
Okay, C4.
00:17
C4 has a message.
00:18
AIS 12, we're in terms.
00:22
Okay, 12 years.
00:23
Service 120. I'm just re-commanded to call, pilot.
00:25
All right, line, engine, command.
00:26
Systems reset[2], box 5473, rewind, back, and automatic.
00:29
Commit, Cerminated. System reset, box rewound and automatic, commands terminated 121.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Activated detector: Fire alarm activation
[2]
Systems reset: Alarm system reset
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near Nashua St, Milford, NH 03055
Correct
Incorrect
