False alarm at town hall fire alarm activated, Monroe NC
Fire units answered a commercial fire alarm activation at the Town Hall in Monroe. Upon arrival, no fire or hazards were found. Crews were asked to assist with resetting the alarm panel.
Audio|Source: Union County and North Carolina State Fire
01:7
Transcript:
00:00
Station 15, Engine 150,
00:03
Commercial fire alarm at the Town Hall, operating on Fox Truck.
00:16
I'm engine 116 in wrap.
00:20
Hello.
00:25
On scene of a two-story residential house, nothing fell or shown from three sides.
00:29
144 will have command and will be on investigating.
00:34
Engine 42 is on scene.
00:41
You got a call from town hall. It's a false alarm, but you need to go on over there and see if you can reset it for them.
00:51
Drive, we're on the right.
00:52
Go down there, you can access it.
00:59
The fire alarm is a false alarm, but you need to go see if you can reset the panel before.
01:07
Tenforth.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Potter Rd, Monroe, NC 28112
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect