False alarm at single family home on Walkertown Drive, Raleigh NC
Fire & ArsonAn alarm activated at a two-story single-family home near Walkertown Drive. Firefighters found a malfunctioning detector causing the warning. The alarm was determined to be false.
Audio|Source: Wake County Fire
01:6
Transcript:
00:00
Hey, you still got an alarm up there?
00:04
All I got is a trouble alarm.
00:09
The system went back to the normal others since the trouble, other than the trouble.
00:15
All right, it might have been that way before.
00:18
Alarm for this alarm.
00:20
We found a detector head that seemed to be malfunctioning before.
00:24
It just did what it is.
00:27
Say it again.
00:30
I think Firefighter Wilf may have located your detector that activated the alarm.
00:41
Okay.
00:42
Later 22 from engine 22 you can clear.
00:52
Homeowner advised false activation.
00:55
We'll check in.
00:56
Engine 22 is on scene.
00:58
Near Walkertown Drive.
01:00
Nothing showing. Two-story, single-family.
01:02
50 by 60.
01:04
Engine 22, Officer will have command application.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Walkertown Dr, Raleigh, NC 27614
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
