Disclaimer
Information CrimeRadar provides is made available solely to protect the public. Using this information to harass, threaten, or harm anyone is prohibited. Information is provided by third parties and may have errors. We cannot guarantee the accuracy, completeness, or timeliness of the information. Location data may not be 100% accurate. Use extreme care and always verify information through official sources and exercise caution and judgment when using CrimeRadar. By clicking continue, I agree I have read and understand the above and agree to these terms and conditions.

Fire alarm triggered by furnace at maintenance facilitySt Charles IL

audio iconFire & Arson
41W952 Burlington Rd, St. Charles, IL 60175

A fire alarm at a commercial maintenance facility near Burlington Road was triggered by smoke from the startup of their furnace. Fire crews arrived and found no visible fire or immediate danger, determining the alarm was caused by furnace smoke.

Audio|Source: Elgin Fire
01:56
Transcript:
00:00
Fox River with our fire alarm[1], District 12 is near Burlington Rd shown KDOT.
00:06
Again near Burlington Rd KDOT.
00:10
It's going to be for a truck maintenance, duct maintenance and smoke.
00:14
U.S. 1811, 1812, 1851 in Battalion 18181818. Again Fox River with a fire alarm[1], District 12, near Burlington Rd KDOT for commercial fire alarm.
00:30
11th in route.
00:36
12 is in route, Coney.
00:41
151's en route.
00:45
151's en route.
00:48
Do you want to have any route?
00:52
Can I, 8252 is going to be around, place at 851?
00:56
That's your take.
00:57
1812's on the scene. We've got one-story maintenance, road maintenance facility, nothing shown from two sides. We'll be out investigating.
01:04
1812 is Burlington Command.
01:10
1812 is Burlington Command. 12 on scene, nothing showing[2].
01:13
1812's command,
01:14
message received.
01:20
He's on-scene.
01:23
18502 on-see, must address it.
01:32
1812, go ahead.
01:35
You can hold up everybody coming in here.
01:38
They just started their furnace,
01:40
activated a local detector.
01:43
We're going to try for a reset in a couple of minutes, but you can hold everybody up coming in.
01:51
Message receives hold up.
01:53
All other incoming units due to the furnace started.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
fire alarm: Automatic fire alarm activation reported
[2]
nothing showing: On arrival, no visible smoke or fire observed

Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.

Location mentioned:
41W952 Burlington Rd, St. Charles, IL 60175

This shows a Google Street View of the area near the location, which might not be the exact address.

Correct
Incorrect

Recent Fire & Arson Incidents in St Charles, IL

Explore the crime map for more.