Fire alarm sounds at unoccupied home with no fire, Stanwood WA
A fire alarm activated at a home near 87 Avenue northeast. Upon arrival, the alarms were sounding but no smoke or fire was found. The residence appeared unoccupied. The alarm system was reset, and the incident was cleared without finding any fire.
Audio|Source: Snohomish County Fire Primary Response
01:13
Transcript:
00:00
please, fire alarm, residential,
00:02
near 87 Avenue, northeast.
00:05
northeast. 46,
00:06
23,
00:07
87 Avenue, North East. Respond on TAC, 1.
00:14
So come into 999.
00:18
Ingen 99.
00:21
At 899 to our call, please.
00:25
On 899. Oh,
00:31
hold on command.
00:32
Camelot command.
00:42
Aid 99. Tire.
00:45
Single engine response.
00:46
State Route 532 and 36 Avenue Northwest. State Route 532 and 36 Avenue Northwest. Respond on TAC 3.
00:56
(name withheld), 31,
00:58
10.
01:00
Volusious pole station,
01:02
the pole station and alarm system have been reset.
01:06
Command's terminated,
01:07
engine 6, and service.
01:09
Copy command terminated[1], I'll show you clear.
01:11
Okay, I'll mention anything.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
command terminated: Incident command concluded; command channel closed
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Stanwood, WA 98292
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect