CO2 system activated during fryer room cleaning at building, Wilmington MA
Fire & ArsonA fire alarm was triggered at a building near Jewel Dr in Wilmington. The CO2 suppression system activated in the fryer room while the unit was being cleaned, not during cooking. No fire was found. The fire panel remains in trouble and the building manager was contacted to arrange for resetting the system.
Audio|Source: Middlesex and Essex Counties Fire
02:2
Transcript:
00:00
Command to X4.
00:01
CISP panel will reset.
00:02
C4, I was right.
00:03
Matt, that panel will reset.
00:05
Recease, standby. Okay,
00:06
we have a reset.
00:07
Okay, we have it.
00:08
It just sits again.
00:09
Okay, acknowledge, silence, leave it in trouble.
00:12
Fire alarm[1]s come in, we're going to need a responsible party contact for this building.
00:17
Fire alarm[1] has that 1842.
00:19
Fire alarm[1], command.
00:20
Answer, command. All right, we had the CO2 suppression system activate in the friar room.
00:30
They weren't on frying at the time.
00:32
They're actually cleaning the unit, so we don't think there was a fire.
00:35
But this panel is going to have to remain in trouble.
00:36
They're going to have to get their company down to reset that CO2 system.
00:40
Also, they don't plan on, they weren't planned on frying until Monday anyway.
00:45
So we're on scene for another few minutes.
00:47
Fire alarm[1] has that, 1842.
00:48
Fire alarm[1], engine five backcourt.
00:50
And in five, you're back in 1842.
00:52
Alarm to Jewel Drive command.
00:54
Command, go ahead.
00:55
Contacted the manager.
00:56
He said he's going to try to call a few people see if anybody can respond.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Fire alarm: Fire detection/alarm activation
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Jewel Dr, Wilmington, MA 01887
Correct
Incorrect
