Fire alarm triggered with no evidence of fire at brick building, Windsor VT
Fire & ArsonA fire alarm was triggered at a two-story brick building near Water Street. Fire units responded but found no sign of fire. The activated detector caused the alarm without a clear reason. The alarm was reset but the panel had a separate issue.
Audio|Source: Windsor County Fire - South
01:55
Transcript:
00:00
Fire alarm[1], engine three, ladder two responding.
00:01
The three and ladder two responding, 319.
00:04
The fire alarm, close the bay door, is the 11 fault.
00:07
Excuse. Fire alarm[1] from engine three.
00:10
On the two-story brick, nothing's showing.
00:13
C9[2] will have Water Street Command.
00:15
The scene is 2020, nothing showing from a two-story brick.
00:17
Fire alarm[1] water should connect.
00:19
Station by M-P-N-N-O-(number withheld).
00:20
Ladder 2, we're going to be out of control in here and you can return.
00:23
Control, 225.
00:24
Fire alarm[1] for all the water street command.
00:25
There's an activated detector head in the lower level with no obvious reason for the alarm.
00:31
The alarm's been reset.
00:32
That panel is going to be remaining in trouble for a separate issue.
00:34
Command will be terminated.
00:35
Ladder 2 engine 3 return.
00:36
No obvious reason for the alarm has been reset.
00:39
We'll remain in trouble for a while.
00:40
You will be clearly returning 2030.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Fire alarm: Fire alarm activation
[2]
C9: Command unit designation
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Windsor, VT 05089
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
