Fire alarm activated at Main St with no fire found, Worcester MA
Fire & ArsonFire department responded to a fire alarm at near Main St. Upon arrival, no fire or smoke was found, and the alarm had been reset before they arrived. All units except one were cleared to return.
Audio|Source: Worcester City Fire and EMS
02:24
Transcript:
00:00
Command the Fire alarm[1], answering command,
00:01
go ahead.
00:02
360 is complete.
00:03
We have a lookout base and ported up windows.
00:05
FTC on the Bravo side.
00:07
We're going to hold the assignment.
00:08
Looks like someone shut off the alarm before our arrival.
00:12
We're going to investigate floor four.
00:14
Received. Car floor fire alarm.
00:17
Fireland. Car four is on seeing engine 5 will remain commands while they investigate.
00:24
Car 41010, engine 5 remaining in commands.
00:28
Tadjit 2 is level 1.
00:33
Tend12 is a file alarm.
00:35
Pile image 12 is back in quadage.
00:37
12 be back at 1011.
00:39
Um, at 3101. 3101.
00:40
1.01.
00:42
Allow company called in 3 water flows in a smoke detector.
00:46
Okay, receive.
00:47
We're going to continue to continue to continue to have them go on tests with their monitoring policy.
00:51
If you can see any action, I'll have this.
00:53
Very good.
00:54
You're responsible party for this, I guess.
00:57
I have a promise number they gave me but she could not give me a responder.
01:00
Okay, someone reset the alarm, there's no active detectors, no sign the smoke a fire.
01:06
You can hold in default.
01:07
Companies on arrival at near Main St can return holding engine 5 and engine 5 only.
01:13
Again, all companies near Main St can return holding engine 5 and engine 5 only, switching over to Charlie 1012.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Fire alarm: Fire alarm activation
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near Main St, Worcester, MA 01603
Correct
Incorrect
